How to Fix Recliner Pull Handle: a Step-by-step Guide

Recliners are a great way to relax after a long day, but sometimes they can develop problems, such as a broken pull handle. This can be frustrating, especially if you can’t find a replacement part or don’t want to spend money on repairs. However, with a little know-how, you can fix the pull handle on your recliner yourself. In this article, we’ll show you how to fix the recliner pull handle in a few easy steps.

Understanding the Pull Handle Mechanism

Tools You’ll Need

1. Step 1: Remove the Old Pull Handle
2. Step 2: Replace the Pull Handle Cable
3. Step 3: Install the New Pull Handle
4. Step 4: Test the Recliner

FAQs About Fixing Recliner Pull Handle

Understanding the Pull Handle Mechanism:

Before you start fixing the pull handle on your recliner, it’s essential to understand how it works. The pull handle is attached to a cable that runs from the handle to the recliner’s footrest. When you pull the handle, it releases the footrest, allowing you to recline. Over time, the cable can wear out, causing the handle to break or become difficult to pull. To fix the problem, you need to replace the cable and pull handle.

Tools You’ll Need:

To fix the pull handle on your recliner, you’ll need a few tools:

• Screwdriver
• Pliers
• Wire cutters
• New pull handle and cable

Step 1: Remove the Old Pull Handle:

The first step in fixing your recliner’s pull handle is to remove the old one. To do this, you’ll need to locate the screws that hold the handle in place. These are usually located on the underside of the handle or behind a plastic cover. Once you’ve found the screws, use a screwdriver to remove them. Once the screws are removed, you should be able to lift the old pull handle off the recliner.

Step 2: Replace the Pull Handle Cable:

With the old pull handle removed, you can now replace the cable. To do this, you’ll need to locate the end of the cable that’s attached to the footrest. Use pliers to pull the cable out of the footrest and then cut it off with wire cutters. Next, attach the new cable to the footrest using pliers. Make sure it’s securely attached, so it doesn’t come loose when you pull the handle.

Step 3: Install the New Pull Handle:

With the new cable in place, you can now install the new pull handle. To do this, position the handle over the hole in the recliner’s frame and secure it with screws. Make sure the screws are tight, so the handle doesn’t move when you pull it.

Step 4: Test the Recliner:

Once the new pull handle is installed, test the recliner to make sure it’s working correctly. Pull the handle to release the footrest and see if it reclines smoothly. If everything is working correctly, you’re done!

Conclusion:

Fixing a recliner pull handle may seem intimidating at first, but it’s actually a relatively simple process. By following the steps outlined in this article and using the right tools, you can fix the problem in no time. Whether you’re dealing with a broken handle or a cable that’s worn out, replacing the parts yourself can save you time and money. So, next time your recliner starts acting up, don’t panic – just follow our step-by-step guide to fix it yourself.