How to Tow a Subaru Forester? (you need to know)

If you’re planning on towing a Tow a Subaru Forester, it’s important to do it correctly and safely. There are certain steps you need to follow to ensure that your Forester is being towed in the best possible way. In this article, we will guide you through the process of how to tow a Subaru Forester.

Introduction to Towing a Subaru Forester

Before we get into the details of how to tow a Subaru Forester, let’s first discuss some important things you need to keep in mind. Towing a vehicle can be dangerous if not done properly, and it’s important to take all necessary precautions to ensure the safety of everyone involved.

Types of Towing

There are two main types of towing: flatbed towing and dinghy towing. Flatbed towing involves loading the entire car onto a flatbed truck, while dinghy towing involves towing the car with all four wheels on the ground. In this article, we will focus on dinghy towing, which is the most common type of towing for a Subaru Forester.

Preparing Your Subaru Forester for Towing

Before you start towing your Subaru Forester, there are a few things you need to do to prepare your car.

Check the Owner’s Manual

The first step is to check the owner’s manual of your Subaru Forester. The manual will give you specific instructions on how to prepare your car for towing.

Check the Towing Capacity

You also need to check the towing capacity of your vehicle. The Subaru Forester has a towing capacity of up to 1,500 pounds, so make sure that the weight of the car you’re towing does not exceed this limit.

Check the Brakes and Tires

Before towing your car, you need to make sure that the brakes and tires are in good condition. Check the brake fluid and the tire pressure, and make sure that the tires have enough tread.

Disconnect the Driveshaft

If you’re towing your Subaru Forester with all four wheels on the ground, you need to disconnect the driveshaft. This will prevent damage to the transmission.

Attach the Tow Bar

The next step is to attach the tow bar to your Subaru Forester. Make sure that the tow bar is securely attached to the car and that all bolts and nuts are tightened properly.

Towing Your Subaru Forester

Once you’ve prepared your Subaru Forester for towing, it’s time to actually tow the car.

Start the Tow Vehicle

Start the tow vehicle and let it run for a few minutes before starting to tow. This will allow the engine to warm up and ensure that the transmission fluid is flowing properly.

Put the Forester in Neutral

Put the Subaru Forester in neutral and release the parking brake. This will allow the wheels to turn freely while you’re towing.

Attach the Tow Bar to the Tow Vehicle

Attach the tow bar to the tow vehicle and make sure that it’s securely attached.

Start Towing

Slowly start towing your Subaru Forester. Make sure that you drive slowly and carefully, and that you avoid sudden stops and sharp turns.

Monitor the Forester

While towing your Subaru Forester, it’s important to monitor it regularly. Check the tow bar and the connections to make sure that everything is secure.

Conclusion

Towing a Subaru Forester can be a challenging task, but by following these steps, you can ensure that the process is done safely and correctly. Remember to always check the owner’s manual of your vehicle, and to take all necessary precautions to ensure the safety of everyone involved.

FAQs